FREE SHIPPING OVER $30, ALL ORDERS SHIPPING FROM USA WAREHOUSE
Home > EDF Upgrades > Servos > E-Sky > ESKY EK2-0704B - Professional RC Helicopter Head Lock Gyro EK2-0704B-EskyGyro
ESKY EK2-0704B - Professional RC Helicopter Head Lock Gyro EK2-0704B-EskyGyro
ESKY EK2-0704B - Professional RC Helicopter Head Lock Gyro EK2-0704B-EskyGyro
Item Code: EK2-0704B-EskyGyro


$37.70
Out of stock


Specification:
 
  • Input signal:1.5??0.5ms
  • Input power: 5~6VDC
  • Weight: 12.5g
  • Size: 27 x 28.5 x 18mm

    Feature Illumination:
     
  • can be used on Engine and Electric Helicopters
  • dual sensibility adjusting - nose locked model and standard model;
  • suitable for 4ch and 6ch transmitter;
  • with a built-in temperature equalizing electro circuit;
  • to both 6CH and 4CH transmitters, the gain value can be adjusted through crust

    Installation:
     
  • The EK2-0704B headlock gyro must be installed horizontally (LED faces upward)
  • the headlock gyro (3pins) cable should connect to the channel 4 on the receiver
  • the tail servo should connect to the headlock gyro
     
  • you can choose not to connect the single orange cable to channel 5 on the receiver. if the gain of the headlock gyro > 50, it is in the head locking mode. If gain < 50, it will be in the normal mode
  • please tie up all the cables before fly, this is to prevent loose cables to touch the main gear or motor

    How to fit Esky Headlock Gyro on Belt CP & other RC helicopters

    • The New and improved Head Lock Gyro from E-Sky.

    EK2-0704B Head Lock Gyro


    This Gyro replaces the now obsolete EK2-0704A and offers much faster and more accurate control of the tail servo - a perfect combination if used with the new EK2-0508 Digital Servo!

    EK2-0704B

     

    Descriptions:

    • Used for engine and electric helicopter.
    • Dual sensibility adjustment --- head locked model and standard model.
    • Suitable for 4ch trancmitter
    • Built-in temperature equalizing electrocircuit.
    • For the 6ch and 4ch transmitters the gain value can be adjusted through crust.
    • Suitable for 3D Aerobatic Flight (not suitable for FC3 Flying)

    EK2-0704B

    Specifications:

    • Dimension: 27 x 28.5 x 18mm
    • Input signal: 1.5 ?? 0.5ms
    • Input voltage: 5V~6VDC
    • Weight: 12.5g

    99