The EP Katana SR is a great looking machine specially designed for precision 3D maneuver. Its oversized control areas ensure that you will get all the control authority you could possibly want. Featuring an eye-catching color scheme surely to draw attention and help greatly with orientation!

Features

•Prop Size:13 x 4 (Not Included) Optional 13x4-13x7 prop can be used
•4.1lbs all up weight minus the battery pack
•4.7lbs RTF (with a Sky Lipo 4s 3000mah 40c Lipo pack--Not Included)
•Simple and lightweight construction is good for electric flight and delivers maximum 3D performance.
•Neat and simple design makes the Katana SR light weight and very easy to assemble!
•Features an oversized rudder makes sure that you will get all the control authority you could possibly want.
•Features enlarged ailerons for 3D performance and control authority.
•An easily accessible and large battery compartment will fit many different size batteries.

Items Required:
•4-5s 2500-3500mah Lipo, 5 standard Servos, Motor, ESC
•A computerized 6ch transmitter with expo and dual rates is highly recommended. A 4ch TX can be used, but will require optional Y-Adaptors for ailerons and elevator servos.
•Tools, CA, and Epoxy Glue is needed to complete the build


Amp/Watt draw with the included stock motor and 13x4 prop (measured at full throttle using an AEO P1 Watt Meter)

Sky Lipo 4s 3000mah 40c Lipo (Not Included):
44amps/667watts

Blue Lipo 5s 2200mah 30c Lipo(Not Included):
55amps/952watts

Note: Using a 5s Lipo will require a larger ESC since the Amp draw was 55A. The stock ESC is rated for 50A so it's pushing near the limit with a 5s battery.

Note: This is KIT ONLY. It doesn't come with any electronics and prop.
 

Wingspan 1500mm	Length 1390mm	Weight 2~2.1 kg	Wing Loading 40~42g dm/2	Airfoil Symmetric	Wing Area 49.7 dm/2