The Bobcat also known to some as the Falcon is a jet craft popular among heaps of radio control airplane enthusiasts. The Airwing Bobcat is a pusher prop propelled plane constructed of durable and resilient EPO foam. The wings span 45 inches with a total wing area of 480in2 . The total length of the plane stretches 51 inches. The 7.5x9 prop is propelled by a 1250KV brushless outrunner motor supported by an 80 amp brushless electronic speed controller. Power is derived from a recommended 14.8v 2700mah lithium battery. Control surfaces are delegated to seven 9 gram servos. Flaps are also equipped on this plane to slow it down nice and easy before landings. Upon receiving the plane one will notice the little details that show this plane is nicely put together. The servos covers, composite hinges, and sleek LED placement on the fuselage represents a well thought out package. 

This Kit model comes with the airframe only. All other essential electronics must be sourced and installed by the builder. You will also need a radio system, battery, and charger to get it ready for flight.

Specifications
Material: EPO
Wingspan: 1143mm(45inch)
Length: 1295mm (51inch）
Wing Area: 31dm2 (480in2)
Wing Load: 50g/ dm2 (16oz/sq.ft)
Flying Weight: 1550g (54.7oz）
Propeller: 7.5*9 

Required to Fly:
6 Channel minimum receiver
6 Channel minimum transmitter
14.8v 2700mah Li-Po Battery
Lipo Battery Charger
Drive System: 3548 KV1250 Outrunner Brushless Motor
ESC: 80A Brushless Speed Controller
Servo: 7*9g servos
Landing Gear: 3 Electric Retracts