The AirWing WingSurfer is an excellent glider for the pilot looking to soar the skies all day on a single charge! With a wingspan of 55 inches and an airfoil designed for optimum gliding capabilities, the WingSurfer will sail the skies for hours as long as you keep it elevated in the thermals. Take it to the cliffs or a beach and enjoy the graceful nature of gliding.  Equipped with a brushless outrunner pusher motor rated at 1950KV and 20A electronic speed controller power is plentiful enabling lift off without being towed. Toss it in the air and power away with authority. When the wind calms down or the thermals diminish the power plant is enough to help you hunt for other thermals and start that next session. If you do happen to smack the side of the cliff or have a bad landing, the tough EPO construction ensures less damage to the airframe. A removable canopy gives you quick and easy access to your receiver and battery changes. This AirWing WingSurfer is a very capable glider in an awesome almost Ready to Fly package. The power system and surface controls are pre-installed. Install your radio system and a 11.1v Li-Po battery with minimum assembly and you’ll be soaring in the skies.

Specifications:
Material: EPO
Wingspan: 1400mm (55.1in)
Length: 915mm (36.0in)
Wing Area: 26dm2 (403.0in2)
Wing Load: 25g/dm2 (9oz/ft)
Flying Weight: 650g (22.9oz)
Thrust Force: 600g (19.4oz)
Drive System: 2627 KV1950 Outrunner Brushless Motor 
ESC: 20ABrushless Speed Controller
Servo: 4*9g servos
Propeller: 5*5 (3-Blade)
Control System: 4CH 2.4GHz Multifunctional Transmitter

Required to Fly:
4 Channel Receiver
4 Channel Transmitter
Li-Po Battery Charger
11.1v 1300mah Li-Po Battery