CCPM is the most precise way to control a collective pitch helicopter. 23-1/2" main rotor diameter, 20-1/2" overall length, 14.2 oz flying weight. Honey Bee KingĄ¯s small size and light weight coupled with collective pitch and a shaft driven tail offer stability and forgiveness with plenty of performance features as your piloting skills grow. All of the major components are preassembled The 120-degree CCPM head design uses 3 servos to control the collective pitch and the cyclic controls. Once you master hovering and slow circuits in "Normal" mode, switch into "Idle Up 1" mode and Honey Bee King IIĄ¯s high-performance motor has plenty of power for sport flying and inverted flight. The tailboom is machined for perfect 90-degree alignment of the tail rotor to the main rotor without adjustments. All spare parts are available

• 6 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
• New 6 channel Transmitter with PIT and PLT mode lock switch and adjustable knob
• Improved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
• Perfect for people who wants to move up from 4ch helicopter
• Perfect for intermediate pilots or pilots who want to try inverted fly or 3D aerobatic flight
• CCPM mixing control system and collective pitch structure make perfect 3D maneuvers such as roll, inverted, and swoop flights
• 120 degree CCPM system provides precise movement if comparing with the traditional mechanical mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced
• Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic responds
• O-ring inside the center hub reduce oscillation of main blades
• Powerful 370 super carbon brush motor used as the main drive and makes the flight much stable
• The autorotation landing system, made of high quality one-way bearing, maximally protects your helicopter from damage
• Hard, Light weight Main Blades
• Brand new design for the structure
• Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance of flying
• Tail rotor driven by belt provide stable flight and low noise
• NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas-Helicopter
• No need to worry about burning tail motors
• Light and hardened wood blades provide great lift, only weight 11g
• Outer placed gyro
• 11.1V high capacitance Li-Po battery provide enough power for any aerobatic flight
• With length-adjustable servo push-rod, precision sub trim can be easily set
• Approximately 10 minutes flight time on each charge
• Best choice for Beginner - Advanced hobbyist
• All spare parts and accessories are available
• Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying)

• Main rotor diameter: 600mm (23.6 inch )
• Tail rotor diameter: 130mm (5.1 inch)
  
• Length: 535mm (21 inch)
• Height: 225mm (8.9 inch)
• Flying Weight: 470g (16.6 oz)
• Drive system: 370 super carbon brush motor
• Servo: 4x 8g Servos and Outside Piezo Gyro
• Speed Controller: 20A ESC
• Battery: 11.1V 1000mah Li-Polymer
• Control system: 6CH CCPM Multifunctional FM Transmitter and Receiver
• Radio Control Range: about 1000 feet (300m)

• Helicopter (100% Assembled)
• 6 Channel CCPM Multifunctional FM R/C Transmitter
• Li-Polymer Battery Charger with Auto Cut-Off
• High Quality 11.1V 1000mah Li-Polymer Rechargeable Battery
• English Manual