The AeroSky FPV Wing is the newest addition to Aerosky's fleet of planes. The delta wing design handles exceptionally well in low and high speeds delivering predictable handling qualities, excellent stability and lots of wing area to cope with additional loads for FPV use.

The AeroSky Delta Wing is constructed of tough EPO foam and finished with beautiful blue and black graphics.? An 880kv out-runner motor and 40amp sky walker speed controller give this plane exceptional power to weight ratio, while digital servos provide precise controls. 3K wrapped carbon tube increases structural rigidity in the wing and are designed into the plane that allows it to break down into three pieces for easy transport. 

The AeroSky Wing has plenty of room under the canopy to mount your choice of FPV or aerial photography electronics. The large wingspan also provides exceptional payload capacity.

This AeroSky Delta Wing is an Almost Ready to Fly version with all electronics installed. You will need a battery charger to charge the lithium battery (not included) along with a transmitter system capable of delta wing setup. Assembly of the plane is also required.

With an average flight time of 25-40 minutes, The wing is capable of covering a large amount of area in a very small timeframe.

Delta Wing Specifications:

Wing span: 1550mm(61in)
Length: 683 mm(26.88in)
Flying weight: 900g(31.74 oz)
Servo: 2*9g
Motor: 3536-KV1200 Powerful Out runner Brushless Motor
ESC: 40A Brushless ESC
Prop Size: 9 inches propeller
Battery: 11.1v(3s) 3000-6000mAh battery
Average flight time: 25 min-40min
Payload capacity: 1.3kg
Maximum speed: 90 kmh
Minimum speed: 15 kmh

Required to Fly:
Assembly of Plane
11.1v 3000mah Lipo Plane Battery
Charger for 11.1v 3000mah Lipo Plane Battery
AA Batteries for Transmitter (6)
Radio System capable of delta wing setup