The CMPro Ventus is well-designed to make
building and flying a lot of fun, it features:
- High precision fiberglass fuselage with fine painting
that perfectly reflects the nice appearance of Ventus.
- Nicely covered wing panel built by quality balsawood, a
decal set is included which you can personalize the design.
- Wing tips in order to reduce the tendency to stall and
enhance scale feelings.
- Removable tailplane for easy transportation.
- Clear navy blue canopy with cockpit.
- An air-brake that efficiently raises control of the
plane and makes landing an easy thing to do! The design is also aimed to
make assembly as simple as possible. A steering set is included to help
setting up the air-brake and make it easy to use.
- A retract system that makes the Ventus suitable for
different flying locations. The retract is easy to use and is linked with
the hatch door for scale features.
- A 8mm-hole is pre-drilled at the nose for towing on
runways. The construction inside fuselage is already prepared for tractors
and thus no further conversion is needed.
 |
SCALE GLIDER
Wingspan:2600mm
|
|
Professional Reviews by RCJet
You bet. Quality is beyond, way beyond, expectations. This is a $600
European glass slipper sailplane selling for only $139.
I have her mostly done. I used digital minis all around, but then when I got to
the last few, I realized it was dumb to throw an expensive digital servo at the
rudder, spoiler, retract, and tow release controls, so I stopped final assembly
until I can get some cheaper servos ordered.
The retract mechanism and gear doors are spectacular.
Glasswork and paint are spectacular, with factory applied and clearcoated
decals.
Excellent instructions, and a ton of neat hardware and thoughtful touches.
CMP has outdone themselves on this one, this is kind of like "the Chinese have
really ARRIVED", you know?
|
Wingspan
2600mm
|
Length
1190mm
|
Weight
1.2~1.3 kg
|
Wing Loading
41~45 dm/2
|
Airfoil
HX83-nase 3 Modify
|
Wing Area
29 dm/2
|
Radio Control
3~6 Ch 4~7 Servos
purchase separately
|
|
What the Pro says!
You bet. Quality is beyond, way beyond, expectations. This is a $600
European glass slipper sailplane selling for only $139.
I have her mostly done. I used digital minis all around, but then when I got
to the last few, I realized it was dumb to throw an expensive digital servo
at the rudder, spoiler, retract, and tow release controls, so I stopped
final assembly until I can get some cheaper servos ordered.
The retract mechanism and gear doors are spectacular.
Glasswork and paint are spectacular, with factory applied and clearcoated
decals.
Excellent instructions, and a ton of neat hardware and thoughtful touches.
CMP has outdone themselves on this one, this is kind of like "the Chinese
have really ARRIVED", you know?
|
The CMPro Ventus features an air-brake which is deliberately designed to
control speed efficiently. It increases overall control of the plane and makes
flying a lot of fun!
Extremely realistic wing tips with a large degree of dihedral for steady
approaches.
The air-brake linkage system is pre-built at the factory to minimize building
time.
The wings are joined by two 3mm metal rods and a 6mm wing main tube for quick
set-up and easier transportation to and from the flying field.
The ABS air-brake is easy to install, colored in red to help greatly with
orientation.
Strong and durable Polystyrene wing tips efficiently reduce your chances of
stalling and increase overall control.
The tailplane is designed for simple set up with two 3mm bolts, removed easily
to reduce the room of storage.
The tailplane can be removed easily to reduce the room of storage.
90% factory built with a complete hardware pack included to maximize your time
of flying.
The retract system makes the CMPro Ventus suitable for any types of flying
conditions. To make it better – the retract is pre-installed which means no
further work is needed!
